Outfitted using the zero leak bidirectional checking sole-noid valves, this power unit is designed to the operation of two independent circuits. Which are respectively for that key and subordinate platforms with the double scissors lift. Two cut-off valves are made use of for reducing the machine manually in case of energy loss. If a lot more independent circuits are necessary to your application please speak to us for availability.
Remark: one. Please check with our sales engineer for your various pump displacement, motor power or tank capability.
two. CSA or UL certified motors can be found on request.
1. The AC motor is of S3 duty cycle, which might only do the job intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
two. Clean all of the hydraulic parts concerned prior to installation of the electrical power unit.
3. Viscosity with the oil shoud be 15~46 cst,along with the oil need to be clean and free of impurities,N46 hydraulic oil is advisable.
four. The electrical power unit should be mounted vertically.
5. Check the oil level during the tank right after the initial running in the energy unit.
six. Oil altering is required following the original one hundred operation hours,afterwards as soon as just about every 3000 hours.
Power UNITS FOR DOUBLE-SCISSORS LIFT