Right Angle Miter Gearbox Standard Features
Dimensions: right position miter gear drive is 3-21/32″ x 3-15/16″ x 1-1/4″ deep
40% glass filled polypropylene
Weight: 10 ounces
Shafts: Ground high-tensile steel. Any shaft may be used as a drive.
Gears: Hardened straight miter gears
Bearings: Hardened metal ball bearings, long lasting lubrication
Mounting: Three shaft installation positions provide versatility in application
Versatile: 3 shaft connections are provided for versatility in application
RAB-1 could be operated CW, CCW or Back again driven
RAB-1 is rated in 1/3 HP at 1800 RPM. Maximum acceleration is 3000 RPM
Benefits and COST BENEFITS
Longer service life
Greater tooth-to-tooth contact
The most effective power transfer design under rated load conditions
Stainless shaft (Please specify series stainless required)
Longer shafts lengths on input and output
Right Position Drives Made with Advanced Quality Construction
Ever-Power 2-Way Right Angle Gearboxes transmit power with noiseless, reliable spiral bevel gears. These premium bevel gearmotors feature hardened spiral bevel gears and nonmagnetic stainless-metal shafts. Our Two-Way 90° Gearboxes are also compact and feature multiple mounting choices. The fully enclosed design guarantees the integrity of the inner gears.
Additionally, the cast aluminum housing of Ever-Power s premium quality Right Angle 2-Way Gearboxes are created for maximum strength and heat dissipation. The drives can be found with shafts of 3/8”, 1/2″, 5/8” and 3/4″ diameter in both 1:1 and 2:1 ratios. We are able to quote several exclusive types of shafts aswell, including:
Two Way 90 Degree Gearbox Applications
Ever-Power Right Position Miter Gearboxes are used throughout dozens of industries in a huge selection of applications. Any make use of that demands the dependable transfer of velocity or power, you could find a two-method gearbox bearing the Ever-Power brand. The compact design of Ever-Power Two-Way Right-Angle Gearboxes makes them perfect for applications such as:
Food Processing Equipment
Ovens & Dryers
Power Transmission Equipment
Ever-Power Inc, offering the most reliable and reliable transfer of power available. Our company is known for its innovative styles and producing high-quality motion control solutions created for engineered functionality and durability. We provide a range of gearbox designs and a wide selection of flexible shaft couplings to provide you with a full solutions for your mechanical and power transmitting applications.
Right Angle Gearbox
Right angle gearboxes are characterized by the fact that the drive shaft and the output shaft are arranged at an angle of 90 degrees. Based on the gearbox type, the axes can intersect in a plane or cross on two parallel planes, which results within an axis offset.
Correct angle gearboxes are realized with various kinds of gear teeth or a mixture of different gearing types. The most famous single-stage gearbox types are bevel and worm.
Because of the high single stage ratios and the low efficiency level, worm gears can perform a self-locking impact. With worm gears additionally it is possible to possess a hollow shaft as the drive shaft.
Bevel gearboxes come with different types of gearing. Bevel gearboxes with intersecting axes are noticed using bevel gearing with straight, helical or spiral teeth. Hypoid gearboxes have helical bevel gearing with which the axes cross with an axis offset. The bandwidth of technically sensible ratios with which the bevel gear stage could be realized is larger with hypoid gearboxes than with the classical bevel gear teeth.
Bevel gearboxes may also be combined with various other gearbox types. A frequent program in this respect is the mixture with a planetary gearbox, whereby the planetary gearbox can be linked upstream or downstream. This results in a wide range of overall multiplication factors and wide variety of uses in many industrial applications.
The efficiency degree of bevel gearboxes is typically less than that of coaxial spur gearboxes, particularly compared to planetary gearboxes. That is because the bevel equipment stage generates a high degree of axial push and radial push, which needs to be absorbed by suitable bearings. This increases the power loss, which is particularly significant in the drive stage of the gearbox.
The working noise and the transmittable torques of classic bevel gearboxes are also lower than with single spur gear teeth. Hypoid gearboxes, however, are extremely noisy and will transmit large amounts of torque, but a considerable amount of bearing load happens in the bevel gear stage of these gearboxes.
In summarizing, a right angle gearbox is usually used when the amount of installation space in the application form is limited, or an angular arrangement between the drive and the output is necessary by the application. They are also used in instances where the input shaft must be hollow in order to business lead through lines or make use of clamping sets.
The advantages of right angle gearboxes:
Use when installation space is limited
Can be coupled with other types of gearbox
Quiet and high degree of torque when working with hypoid gearboxes
Edition with hollow shaft possible
The disadvantages of right angle gearboxes:
Lower effectiveness level than planetary gearbox
Reduce torques in single-stage ratio range
The Ever-Power, the original right angle gearbox drive, is widely recognized and is used worldwide. The Ever-Power provides manual or power transmitting of rotary motion in a concise, standardized right angle device.
Our standard type of bevel gearboxes are available from stock in both an In . and Metric Series, solitary or dual output shafts, 1:1 or 2 2:1 ratios, and grease lubricated forever and also have an operating temperature selection of – 65 degrees F to + 200 degrees F ( – 54 degrees C to + 93 degrees C). Making use of carburized case-hardened Coniflex* bevel gears, all Ever-Power units utilize totally enclosed & sealed ball bearings.
The cast aluminum housings upon our 90 degree gearboxes are precision machined, on our CNC machining center and then coated with a chemical substance film to safeguard the material, and use flanged ends and side bosses for compact installation in a wide variety of applications.
The shaft material used for sizes 1, 2 and 3 is #416 stainless. On the 2 2:1 versions, the pinion shaft is certainly carbon steel. For the sizes 4 & 5, the material is black oxide carbon metal. Shafts can be given unique extensions (with flats, splines, holes, etc.) and /or specific lengths upon ask for.
In addition to your standard models, we will modify our units to meet your design specifications! Our sales and engineering departments are ready to help you with your specific application requirements.
Through the years we’ve received questions about almost every part of the gearbox selection procedure. One of the questions we’ve had several times is, “What is a right-position gearbox or a right-position drive?” Or, more particularly, “How is certainly a right-position gearbox or drive not the same as a quickness reducer or other types of gearboxes?”
First, let’s focus on some simple terminology. It is not uncommon for the terms “gearbox”, “drive” and “swiftness reducer” to be used interchangeably.
A gearbox is any device that runs on the gear train to transmit torque/rpm and whatever uses a gear to transmit torque/rpm is a gearbox.
A right-angle drive is a mechanism with a gear teach that may transmit torque/rpm 90 degrees, to carefully turn a corner
A equipment reducer is a system with a gear teach that can reduce rpm output. Due to decreasing rpm is increasing torque at the same ratio velocity is reduced.
A gear box may also be a speed increaser
The type of gear used in the apparatus box defines it as the right angle or an inline drive.
A worm gear drive is a right-angle drive as is a bevel gear
A spur gear drive is inline
A helical equipment is inline but can also be a right-angle drive
So, what is a right-angle gearbox?
A right-angle gearbox is a gearbox with a right-angle change in the direction of the shaft. It’s rather a 1 to 1 1 ratio or a multiple of 1 1 such as 2:1 or 15:1. If the ratio is 1:1 it is a right-position drive. If the ratio is certainly greater than 1:1 it really is a right-angle quickness reducer.
High torque ball bearing design
Solid one-piece aluminum housing seals gears from outside contaminants for smooth operation
Right- or left-hands rotation to convert power either direction
Very easily slides axially along the drive or driven shaft for flexible positioning
Alloy metal helical gears for high performance
Built-in 5 sizes with 3 types of result shaft : hollow, projecting or double-extended. Moreover, yet another output shaft can be installed opposing to the input shaft.
Three input types can be found : with projecting input shaft, with pre-designed motor coupling (bell and joint) and pre-engineered COMPACT motor coupling.
Gear device body in engineering cast iron, EN GJL 200 UNI EN 1561 ribbed internally and externally to ensure rigidity and machined on all areas for easy positioning. The single lubrication chamber ensures improved heat dissipation and better lubrication of all the internal components.
The mechanism of the gearboxes consists of two Ever-Power spiral bevel gears with precision lapped profile, 16CrNi4 or 18NiCrM05 manufactured from steel.
The use of top quality bearings on all the axis ensures long life to the gearbox and allows very high radial and axial loads.
Gearbox casing, flanges, bells and covers are externally painted with BLUE RAL 5010.
Right angle gearbox
Right Angle Miter Gearbox Standard Features