EP offers a full selection of modular servo gearboxes /worm reducers. The modular style allows for configurations with motor type flange and productivity pinion for rack and pinion drives, along with solid end result shafts, Hollow bore result, and insight shafts for all the positioning applications. The modular design and style allows for universal mounting of the gearbox in virtually any orientation.
Servo-Worm Reducers were specifically developed for employ with the latest servo motors in applications that demand specific positioning and repeatability.
These reducers are ideal for applications in material handling, automation, machine tool, and robotics.
The light-weight modular aluminum housing design permits easy machine integration, and excellent heat dissipation. A wide variety of type flanges and couplings can be found to allow easy mounting of practically any servo-motor and custom flanges could be accommodated. End result configurations with pinion, hollow bore, or stable shaft are available and can be configured for input with motor flange, free of charge insight shaft, or both no cost input shaft and motor flange.
An optimized worm equipment tooth design insures huge efficiency while at the same time decreasing backlash. Two levels of backlash are available, Precise or Extra-specific, with backlash amounts to significantly less than 3 arc minutes.
Obtainable in 6 sizes
Ratios from 2 to 60:1
Torque Potential up to 4400 Lb.-Ft. (6000 Nm)
Input Boosts to 6000 RPM
Two backlash levels – Precise and Extra-precise.
Modular design appropriate for rack & pinion system
4 input styles
7 output styles
28 possible standard configurations
Wide range of servo gearboxes, made to fit almost all servo motors on the market
Designed for the best torsional stiffness and the cheapest angular backlash, pertaining to the maximum torque and overhung loads
Bush with slot machines and hub clamp for servomotor coupling
Enhanced dimensional compactness due to direct servomotor coupling
Widest range of practical servomotors coupling dimensions.
The right technical solution because of a comprehensive range of sizes, gear stages, transmission ratios, designs and nonstandard designs.
High-Torque (HT) Servo-Worm Reducers
This standard selection of Servo-Worm Reducers are simply perfect for use in applications that demand high performance, precise positioning and repeatability. They were especially developed for work with with state-of-the-art servo engine technology, providing tight integration of the electric motor to the unit. Angular backlash of less than 1 arc-a few minutes is provided standard.
They are available in four sizes (50 mm to 100 mm center length) with input speeds up to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide selection of motor couplings and mounting flanges are for sale to assembly to nearly all servo motors, and the hollow bore outcome can be utilised to mount productivity shafts, pinion shafts, or other drive elements.
Standard applications for these reducers include precision rotary axis drives, traveling gantries & columns, materials handling axis drives, zero-backlash axis drives and digital line shafting. Industries offered include Material H, ling, Aerospace, Machine Device, Automation and Robotics.
Gearing: Internal gear style was optimized to supply an angular backlash of less than 1 arc-minutes in assembly, with the choice of “in the discipline” adjustable backlash if necessary.
Bearings: Input angular contact bearings for high source speed, and robust end result tapered-roller bearings for great radial and axial load ability.
Housing: Light weight aluminum housing once and for all heat dissipation, with essential insight flange for servo motors and general mounting on any deal with.
Output: The result bore is available with a compression-type hub or a good ISO 9409-1 flange (see dimension pages). We give a line of equipment to adapt these outputs to right shafting, Rack & Pinions, or other gearing types.
This gearbox utilizes a 30:1 ratio worm-travel reduction for applications that require extremely slow and smooth rotational motion. The worm-drive design not merely minimizes backlash but also eliminates back-generating the gearmotor so a posture can be kept even when power isn’t applied. The precision ground 3/8” stainless steel productivity shaft is supported by dual 3/8” ABEC 5 ball bearings to support lots from any orientation. The ¼” ABS plastic and aluminum structure offers a rigid framework without adding unneeded weight and is very easily installed to any flat work surface by utilizing the base mounting tabs. Our Normal Spur Gear motors will work with this gearbox (engine sold separately). The Vertical Shaft Worm-Drive Gearbox is simply perfect for turn-tables, time-lapse systems and low-acceleration applications that require high accuracy and torque.
Motor RPM required = 1 / (mins per rotation desired / 30)
Example: 1 / (ten minutes per rotation / 30) = 3 RPM motor had a need to achieve 10 minutes per rotation (at max speed)
now offers an economical right angle gearhead for make use of with small NEMA 23 through 56 and similar compact metric servo and stepper motors. These reducers are most appropriate for basic action and source speeds of 2000 rpm where profile request costs are a major consideration.
7 sizes with torque capacities up to 684 Nm
12 exact single stage ratios from 7:1 to 100:1
2 stage ratios available
Inch or metric end result shafts
Hollow output standard, insert shafts optional
2D and 3D drawings obtainable online
Flexible servo motor interface
Clamp-style hub provides zero-backlash electric motor shaft connection
Aluminum diecast casing for low weight
Large result bearings accommodate higher radial loads
Inch or perhaps metric hollow bore with keyway, solitary and dual plug-in shafts also available
Double lip end result seals provide optimum protection against contaminants
Face or base mounting choices, bolt on flanges and torque hands also available
Bronze wheels cast in the end result shaft for higher strength
Hardened and floor worm shaft provides even operation
Reducer completely sealed for common mounting and long-life lubrication
Two bearing worm support isolates electric motor bearings from radial and axial loads
Flexible coupling component eliminates electric motor misalignment and bearing wear
Worm Gears are right angle drives providing significant velocity ratios on comparatively short center distances from 1/4” to 11”. When properly installed and lubricated they function as the quietist and smoothest working type of gearing. Due to the high ratios conceivable with worm gearing, maximal speed reduction could be accomplished in fewer space than many other types of gearing. Worm and worm gears are powered by nonintersecting shafts at 90° angles.
EFFICIENCY of worm equipment drives depends to a sizable extent on the helix angle of the worm. Multiple thread worms and gears with bigger helix angle prove 25% to 50% better than one thread worms. The mesh or engagement of worms with worm gears creates a sliding action triggering considerable friction and greater lack of efficiency beyond other styles of gearing. The utilization of hardened and floor worm swith bronze worm gears raises efficiency.
LUBRICATION is an essential factor to improve efficiency in worm gearing. Worm gear action generates considerable high temperature, decreasing efficiency. The quantity of electric power transmitted at confirmed temperature raises as the performance of the gearing raises. Proper lubrication enhances productivity by minimizing friction and heat.
RATIOS of worm equipment sets are dependant on dividing the amount of teeth in the gear by the amount of threads. Thus one threads yield larger ratios than multiple threads. All EP. worm equipment sets can be found with either left or right hands threads. EP. worm gear sets are offered with Double, Triple, Qua and Single-druple Threads.
SAFETY PROVISION: Worm gearing shouldn’t be used as a locking mechanism to carry large weights where reversing actions can cause harm or injury. In applications where potential damage is non-existent and self-locking is wanted against backward rotation then use of an individual thread worm with a minimal helix angle instantly locks the worm gear drive against backward rotation.
Materials recommended for worms is normally hardened steel and bronze for worm gears. On the other hand, depending on the application form unhardened metal worms operate adequately and considerably more economically with cast iron worm gears at 50% horsepower ratings. In addition to metal and hardenedsteel, worms are available in lightweight aluminum, stainless, nylon and bronze; worm gears can be purchased in steel, hardened metal, stainless, aluminium, nylon and nonmetallic (phenolic).
EP also sells gear tooth measuring gadgets called Equipment GAGES! Gear Gages decrease mistakes, save money and time when identifying and purchasing gears. These pitch templates can be found in nine sets to identify all the typical pitch sizes: Diametral Pitch “DP”, Circular Pitch “CP”, Exterior Involute Splines, Metric Module “MOD”, Stub Tooth, Great Pitches, Coarse Pitches and Uncommon Pitches. Make reference to the section on GEAR GAGES for catalog quantities when ordering.
Take an appearance at some vital, useful articles regarding Servo Worm Reducer.