The high-end economy lines GSN & GFE combine powerful with economic efficiency: both lines are also built with helical ground gears, ensuring a minimum noise level and smooth running. The full needle bearing provides been especially designed to reach high torques that beat the competition for systems of the same size. All planetary carriers are manufactured as a cage made from solid materials. This increases tranquil operating characteristics while at the same time improving positioning precision and reducing backlash. An additional shaft sealing ring ensures maximum dirt and splash water protection relative to protection course IP65 in all lines.
One method to reduce backlash is to use precision gears. The focus on production in precision gears is usually tighter tolerances, so all over the gear will be a tighter, more specific suit. And the tighter fit means much less play in the gear teeth, which may be the trigger of backlash in the first place. Of program, precision gears are more costly, but if the application demands high accuracy, then precision gearing may be the way to go.
From a gear design perspective, a simple way to lessen backlash is to ensure one’s teeth mesh tightly together. This is typically done by shortening the center distance between gears. For pre-loading, this could be done utilizing a spring mechanism to carry the gears firmly set up. This also eliminates the perform between the gear teeth and therefore eliminates backlash.
Of course, the type of gears used can also have a large impact on the quantity of backlash. So for example, some equipment types such as stress wave gears, or harmonic gear drives, have zero backlash.
The GSD, GSB & GSBL high-end gearbox lines are constructed in a space-optimized, two-stage design. Because of the lower torque values, the input stage is usually dimensionally smaller compared to the output stage. Its short design makes the GSD series the ideal high-end gearbox for space limited applications. The low standard backlash of the GSD range makes it the perfect fit for highly powerful applications where highest positioning and quickness accuracy is necessary. The flange output creates highest torsional rigidity. For the accommodation of especially high axial loads, taper roller bearings are optionally available in sizes with 90 mm diameter or higher. The GSB line stands for high performance in combination with low backlash and high precision. Its robust, one-piece housing permits a higher gearbox rigidity and the absorption of high radial and axial loads. The angular gearboxes of the GSBL line offer the same advantages as the GSB collection; the right angle form makes the GSBL range the perfect match for all dynamic applications where space is bound.
Want much more details on Worm Drive Servo?