This standard selection of Servo-Worm Reducers are perfect for use in applications that demand high performance, precise positioning and repeatability. These were specifically developed for use with state-of-the-art servo engine technology, providing restricted integration of the engine to the unit. Angular backlash of significantly less than 1 arc-mins is provided standard.
They can be purchased in four sizes (50 mm to 100 mm center range) with input boosts to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide selection of electric motor couplings and installation flanges are available for assembly to practically all servo 
motors, and the hollow bore output can be used to mount output shafts, pinion shafts, or other drive elements.
Normal applications for these reducers include precision rotary axis drives, traveling gantries & columns, materials handling axis drives, zero-backlash axis drives and electronic line shafting. Industries served include Material Handling, Automation, Aerospace, Machine Tool and Robotics.
helical-worm servo gearmotors possess a torque range of 92 Nm to 520 Nm. As angular drives they are especially space-saving and reduce the expenditure for valuable set up space.
The helical-worm servo gearmotors are designed in such a way that they guarantee you a low-noise system environment. Moreover, these gearmotors give you superb attenuation properties for the operation of your systems with low degrees of vibration. This is certainly due to the longitudinal app of power on the insight shaft. This enables torque impulses to be prevented successfully and for maximum results with regards to running smoothness and sound reduction to be performed.
Both the equipment unit, and the synchronous servomotor derive from our modular program. This enables you to have completely individual configuration options for every application. One issue is certain – Our servo gearmotors are real specialists for very specific requirements.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right angle gearboxes, speed reducers, worm gear reducers and worm drive gearboxes. Gear decrease boxes include a gear arrangement in which a equipment in the form of a screw, also known as a worm, meshes with a worm equipment. These gears are typically made from bronze and the worms are metal or stainless steel.
While worm gears are similar to a spur gear, the worm gearboxes are considerably smaller than other equipment reduction boxes. A main benefit of worm equipment reducers is that they produce an output that’s 90° from the insight and can be used to transmit higher torque or decrease rotational speed. Frequently, a worm gearbox offers right hand threads; to change the direction of the result, a left-hand thread worm gearbox is necessary.
At times a motor’s capability could be limited to the stage where it needs gearing. As servo producers develop better motors that can muscles applications through more difficult moves and produce higher torques and speeds, these motors require gearheads add up to the task.
Here is a lot more information on this subject worm drive servo