Worm drives are found in presses, in rolling mills, in conveying engineering, in mining industry machines, and on rudders. In addition, milling heads and rotary tables are positioned using high-precision duplex worm drives with adjustable backlash
Worm drives are a compact means of substantially decreasing acceleration and increasing torque. Little electric motors are usually high-speed and low-torque; the addition of a worm drive increases the selection of applications that it might be suitable for, specially when the worm drive’s compactness is considered.
Lubrication
Enclosed gears are usually lubricated with oil. The most typical 
types of oil happen to be rust and oxidation inhibiting, severe pressure, compounded, and synthetic. Other types include grease and stable film. Grease can be used for worm, planetary, cycloidal, and hypoidal reducers. Common distribution methods are a splash system and a circulating system
Worm Reduction Gearbox Program:
Seals and Breathers
Seals will be used between the gear housing and input and output shafts to retain oil and block dirt. The most commonly utilized type, the radial lip seal, consists of a metal casing that fits in to the casing bore and an elastomeric sealing lip that presses on the shaft. Labyrinth seals will be use for high-swiftness applications, and contain a housing with a series of bands that limit leakage. A breather is usually a connect with a hole that is mounted in the gear housing to permit airflow and relieve internal pressure.
A gearmotor combines an enclosed gearset with a engine. A motorized reducer resembles a gearmotor except that it is driven by another NEMA C-face motor.
worm reduction gearbox is used to fit in any kind of everyday regimen.